Most people who live in the city cannot imagine their lives without hot or cold water. However, there are suburban houses that are not connected to central water supply (this may be due to the fact that it is simply absent or the house is very old). So in this case there should be wells from which water is taken. This method of water flow is extremely inconvenient. Therefore, there is a need to supply water to the house and create autonomous water supply.
At the beginning of the design of a new water supply, you need to initially calculate the required amount of water that will be supplied to the house. Calculations show that about 100 liters per day need one person. But at the same time, you need to count on the guests who came. Also thinking about the water supply plan for a country house, you need to calculate how many water intakes will be installed in the house (usually 5-6 points: bathroom, shower, toilet, kitchen, washing machine and crane on the street).
In rural areas, the source of water supply of the country house is a well or well, from where water will be supplied. Usually a well is enough for a family of 3-5 people. To ensure this system, special equipment is needed.
The device of autonomous water supply includes a system of pipes and pump. Speaking about the main part of this system, the pump, we can say that they are divided into superficial and immersed. Superficial pumps are suitable for working with wells or wells up to 10 meters deep. When choosing a pump, it is also worth paying attention to its performance and pressure. Also, to create a water supply system to the house, a hydraulic accumulator is needed — an pressure tank with a capacity of up to 300 liters.
To control the entire system, you need an electronic unit, a three -phase cable with a coupling. At the same time, fasteners (clamps for fastening, adapters) and a directly pressure pipeline are needed. The principle of operation of the entire system is quite simple. When working the system, the pump turns on and begins to increase the pressure in the tank and pipeline. After the tank is filled, the pressure increases even more and the relay will automatically turn off the pump. With gradual consumption of water, the pressure in the pipeline and the tank drops and then the relay automatically turns on the pump, and the tank is filled again. The system is quite simple and can make life easier. Therefore, the installation of an autonomous system at the moment (in the absence of a central system) is more likely to need to.
