Who never soared in the sauna — he lost a lot. Numerous sauna lovers know that after the bath you are “born” again. That’s just where to get it, a parish?
A good option is a bathhouse on your garden plot. Today, family saunas with an area of 2 to 15-20 m2 are mounted from ready-made sets in a free place in large bathrooms, though they are not affordable at a price at a price. But you can build a sauna yourself and install it anywhere in an apartment or house — in the pantry, bathroom, separate building and even on the balcony or in the household…
We made a cabin with overall dimensions: height — 220 cm, -136 cm wide, 200 cm deep. Heated volume — 5 mz. The main materials for construction are boards (conifers) 30 mm thick; The blanks of 30×80 mm and 30×50 mm for knitting the frame frame are cut.
Sauna assembly technology as follows. The internal surfaces are sheathed with downs of aspen with a cross section of 18×40 mm, the floor with boards with a cross section of 25×110 mm, and the outer ones with a lining of coniferous wood with wood lining.
The design of the cabin-prefabricated, fitting the finished shields of the walls are installed on the lower shield and connected with it with dummies, and the assembled ceiling is laid on the walls on the walls.
The base of the shield (for example, the floor) is a frame of power bars with a cross section of 30×80 mm, assembled in a spike. Three short median bars are connected to the main power of a non -berel.
All compounds of bars with each other are made on PVA’s pool. Having tied the frame and checking its diagonals, they put two wooden dags in the corners — they will give the frame additional stiffness. The collected frame is placed for drying on a flat plane (workbench), pressing the corners. After the glue dries, the frame is removed from the workbench. If the frame has led a little, you should not despair: after patching the lining, it leases. From below, the frame is sewn up with non -cut boards — this is a black floor of the frame, to which three shared bars are nailed with a section of 20×40 mm — to move the finished cab and laying an electric cable.
