If you decide to repair the bathroom and toilet with your own hands, then you should immediately understand that since you are unlikely to be a professional in this matter, you should adhere to the most serious approach to the upcoming work and avoid haste and bustle of bustle. Only in this case you can achieve the highest quality of the repairs of the.
I must immediately remember that these rooms are characterized by increased vaporization and high humidity level. Therefore, use exclusively moisture resistant materials in your work.
DIY bath and toilet repair
Starting to repair the bathroom and toilet with your own hands, first of all, you have to dismantle the previously used equipment. To do this, you need to block the water supply, and then disassemble the old pipeline, here you often have to resort to the help of a grinder, especially if the pipes are old: from cast iron or steel. For the longest possible operation today, almost always for installation, polypropylene pipes are used, the connections are neatly soldered. Additional protection against water leaks, as well as for an attractive appearance, pipes are laid in pre -launched intra -faceted channels.
After removing the old tile, and in the case of painted walls — paint, you may need to align the surfaces. The degree of evenness of the walls, floor and ceiling is very simple to measure with the usual building level. The walls are aligned either by applying a layer of cement plaster, or finishing them with a moisture -resistant drywall. It is not difficult to guess that the first option will be somewhat more complicated and requires more painstaking work.
DIY bath and toilet repair
Increased attention must be paid to laying the wiring. The camshaft is always installed outside the bathroom and toilet, and the wires are laid only with whole segments and, necessarily, with double insulation. The wiring should have a double power supply.
When repairing the bathroom and toilet with your own hands, take care of the floor repair, study its device. After all, if flooding occurs, then your neighbors will inevitably suffer from below, and this will entail conflict situations and additional cash expenses. Therefore, the proper waterproofing of the floor is one of your primary repair tasks. Fortunately, in our time, the assortment of materials with increased resistance to moisture and dampness is very, very extensive, so you will not have problems with the choice. It is advisable to align the floor using a concrete screed.
Do -it -yourself battles and toilet recommendations
At the stage of laying tiles, pay special attention to the absence of cavities and voids under it. Otherwise, the deformation of the tile coating and its split in the future are practically inevitable. Thoroughly swing the seams between the tiles, try to do it to the full depth. When choosing a solution for styling, it is preferable to opt for fixing compositions, since they are most resistant to an increased level of humidity.
DIY bath and toilet repair
The lining and decorative decoration of the bathroom and the restroom should also be performed using materials resistant to high humidity. Plastic panels, or aluminum profile are ideal for the construction of ceilings.
A few more expensive, stretch ceilings can do, but their choice is also great for bathrooms and toilet rooms. Moreover, they look very attractive and allow you to create wonderful creative compositions. But if there is no desire or the opportunity to spend money on the finish of the ceilings, then you can simply align them using moisture -resistant putty and paint in a suitable color.
