The main value of the parquet floors is that they are made from natural wood, unfortunately the tree in terms of strength is inferior to materials such as tiles or plastic, and so, it must be careed for it, from which it follows that you will be obliged to grind it periodically and update it varnish coating. Most often, the intervals between updates are 7-10 years, depending on the stiffness and thickness of the lacquer, as well as on the intensity of the load on the parquet floor.
Grinding, or as they said earlier, the cycle of parquet floors is carried out with the aim of lease the surface, restore the quality characteristics of the tree, and at the same time repair the details that have extended during the service.
Before proceeding with the cyclist of the scare floors, it is necessary to carefully examine it, tapping every dick. All defects revealed in this way must be drilled and filled with special glue by means of a medical syringe.
In most of the area, flat -grinding and ribbon parquer -grinding machines are better, and in inaccessible areas — manual machines for cycling of angles. Parquet -grinding machines are advised to use as a rule, according to such a scheme (perimeter, perpendicularly and along the room) using an abrasive tape with a grain coefficient of 60, 80, 100 and 120. Next, the parquet floor is putty, acrylic putty on wood.
It is preferable to perform a final cycle to perform a ribbon parquer -grinding machine, priming abrasive circles with numbers one hundred and twenty for these purposes — one hundred and fifty. It must be remembered that, you need to use grinding materials methodically without jumping through the subsequent number of granularity, otherwise this will lead to a grinding surface marriage.
Having completed the cycle, they begin to apply a protective decorative layer at once, avoiding the oxidation of wood.
When purchasing paints and varnishes, it is necessary to carefully study the features of the use and compatibility of the applied varnishes.
After that, the working room is thoroughly cleaned of dust and proceed to applying the varnish (or if you plan to change the natural color of the wood) of the tinting layer. To obtain the highest quality, the varnish is applied in three layers, not counting the primer. Between each layer, grinding a disk parquer -grinding machine is performed. High -quality varnishing of the parquet involves applying varnish non -estate than three layers, with mandatory polishing of each, intermediate.
Use parquet is allowed only after the varnish is completely hardened.
