Sometimes we are faced with breakdowns in the plumbing. But this is not a reason for the sudden call of a locksmith. Some minor malfunctions can be successfully eliminated with your own hands. For example, what to do if water flows into the tank from the water supply channel without interruptions. To make the correct diagnosis, it is necessary to check the following malfunctions. Perhaps the float lever in the tank has shifted from his usual working condition or it was simply distorted. To eliminate this malfunction, it is necessary to raise the lever to the most optimal position for this system, about 2, 5 centimeters below the connection of the underwater tube. Such an option will also be possible that the float itself is not working. This can happen due to depressurization of the float case. In this case, the easiest solution would be to replace the float. But experts offer the opportunity to resort to a certain spectrum of tricks. For example, you can simply stick a patch, or carefully seal the hole on the float. You can also tightly pack the float in a cellophane bag, then it can be tied along the lever on which the float is attached.
It is also necessary not to forget before eliminating the malfunction should be poured out of the tank, as well as put in a warm place and thoroughly dry out.
