Glash of glass. Millets can be bent, previously heating it with a technical phen. The air heating temperature should be adjusted so as to achieve the plasticity of the millennium, but without overheating it.
Bocation assembly. A special conductor will help you precisely mark, and then drill holes for dadies. In the absence of this tool, the details of the side elements can be connected to each other on the jack of a chisly unmasive.
Hanging the shelf. On the stacks attached from the inside to the side elements E, put the shell -board and fix it with screws of 2, 5×12 mm with a secret head, having previously drilled and unscrewing the holes for them.
Fastening of the facade element. The facade element of plexiglass is fixed with screws with a secret head and a length of 19 mm (preferably brass), having previously hung it relative to the sidewalls.
A reliable suspension method. The lower beveled block of the suspension is horizontally attached to the dowels to the wall. The regiment is put on it with the upper bar with a beveled lower edge. This bar serves simultaneously the transverse spacer of the shelf.
