Lighting in bathrooms

Lighting in the bathroom occupies its special niche. After all, the kitchen, bedroom, hall, living room have natural light sources. The windows are extremely rare in the bathroom, and if they are, they are closed with light -resistant curtains. For this reason, the lighting in the bathroom should be given special attention. During the zones of illuminated areas of the bathroom, you need to immediately allocate places where more active lighting is required, where it will be less. LED modules are great for this purpose. Use more than one light source in the center of the ceiling of the bathroom for this. This option is suitable for small space. To illuminate the zone near the mirror, you can use several lighting light sources. Their goal is to achieve the maximum effect of illumination of this zone and protection against a blinding eye of brightness. It must be taken into account that in the zone above, or on the sides of the mirror, the light scarecrows should be white, any other light will leave their distorting glare in mirror reflection. As a light scarecrow, lampshades made of various materials are used. The zone around the bathroom itself should no longer have as bright as a mirror lighting zone. Designers offer a variety of solutions for this place. A relaxing effect and creating unusual coziness create baths with autonomous backlight using LED modules. Above the bathroom, you can use sconces and various lamps with colored lampshades, this zone allows you to create the effects of rays of various shades. The area around furniture in the bathroom is also recommended for highlighting. Lamps are installed directly in furniture and even drawers. In this case, you can try to use LED tape or the same Modules LED. This carries not only the aesthetic side, but also functionality, logic. Illuminating the bathroom areas require the strictest observance of fire safety. The aesthetic side of the issue should be parallel to compliance with the norms of competent use of electrical devices.