Particularly charm and coziness will give the walls pasted with fabric and floors. For decoration, cotton and linen fabrics are used, as well as burlap. The fabric to the wall, in addition to gluing, is also fixed with the help of frames or.
The surface of the walls for the fabric sticker should be perfectly smooth and efficiently stitched. It is best to glue the fabric with flour clayer, casein or adhesives on the CMC basis, you can also use mastic.
It is possible that the fabric after getting wet and the subsequent drying may give a strong sediment, so the fabric must be checked in advance by wetting and drying a separate piece. If the shrinkage turns out to be strong, then the fabric must be dechatted, t. e. soak it all and dry. If the shrinkage is small, you can do without decature: a small shrinkage contributes to a better tint of the fabric to the surface.
At first, glue is applied to the walls with a thin layer, then the fabric is applied to the water and smoothed out with a brush.
A denser fabric is used for floors. The floors must be leveled and plunged all the cracks. Paul putty can be prepared yourself by mixing small sawdust or wood dust with nitrolak, PVA or liquid glass. Then the gaps and seams are sealed and after drying are processed with sandpaper. If the floor has quite serious defects, then it can be laid on it sheets.
In front of the flooring of the fabric, you need to remove the plinth. Then the fabric canvases are laid out on the floor, each is stretched, smoothed and pierced with small nails. Next, the fabric is covered with special parquet varnish. Varnish is applied in three layers with a foam roller.
