The support of four pine or spruce strict bars with a cross section of 40×40 mm and a length of 2, 5 m is made. The upper ends of the bars are washed down at an angle of 15 °. Fasten the legs-brucks to the side faces of the decorative spire with screws-sam cutters with a length of 35 and 60 mm. As a blank for a spire, take a block with a cross section of 60×60 mm and a length of 600 mm. The faces and decorative samples on the spire are made by circular or hacksaw with the subsequent removal of excess wood.
Before assembling the support, its parts should be impregnated with an antiseptic and thoroughly painted, paying special attention to the lower part of the legs. Install a garden pyramid, slightly deepening the legs into the ground.