Escalled log

The log of the log is a material for the construction of wooden houses and baths, as well as for the construction of various outbuildings to houses (porch, verandas, terraces) and small buildings such as a canopy, arbor, aviary, aviary. From the gallected logs you can build houses and baths of various layouts. Recently, more and more often began to build wooden houses, where the base is a log house of logs. These logs have the same diameter. They are processed by the factory way. Therefore, the log of the hand cutting logs looks much better, and the seams of the log house — much better. This is easily explained by the fact that only modern equipment is used for the manufacture of log grooves. It is no coincidence that the log of the log is so popular. If you carefully examine the galbed log, you can notice what kind of verified form the grooves and locks have. It is calculated with mathematical accuracy. The connection of logs is possible at any angle. In this case, the gap between the crowns remains minimal. Each log has clear geometric parameters. All this provides the most tight fit of the logs. When using ordinary logs, you have to engage in their painstaking fit to each other, observe a certain sequence of alternating lumps and peaks. The log of the log avoids these problems, since each log has the same diameter and a perfectly processed surface. That’s why the house from such logs is incomparably good from an aesthetic point of view. «Oscilinding» does not require any finish and has the highest quality processing. This is a technological material, the use of which practically excludes manual labor. Collect log houses as a designer. All preliminary operations are carried out in the factory. For the manufacture of «Oscilinding», a complex of modern machines is used. Thanks to high -tech equipment, a number of consecutive operations are performed, which are associated with the processing of logs. From the non -cursed log, as a result, a high -quality building material is obtained. A log acquires an ideal cylindrical shape. Its surface is thoroughly processed. Next follows the ending of the log, and then the manufacture of grooves and cows of cups. The material is necessarily treated with antiseptics.