Over time, wooden doors and window bindings can be sigred, stir, rot and hang out. Therefore, such wooden things in the house sometimes need to be repaired. In this case, you need to follow some rules. Firstly, in the narthex of doors and window bindings should be of leaks, two or two and a half centimeters wide, as this is needed for subsequent coloring. The gap between the door and the floor should be at least ten centimeters so that the path or carpet does not interfere with their opening or closing. The door box should be installed with a horizontal orientation and vertically. This can be achieved using wedges that can raise different sides of the box. After the box was leveled in these areas, it is tedious to attach it to the wall at three points. In the openings drilled in the wall, wooden corks are clogged. Then the box is installed, and nails are driven into the plugs. Also, instead of nails, you can use steel pins. If there is a gap between the door frame and the wall, then it must be closed with a wooden rail and solution.
It happens that a crack appears in a whole window sill, which passes to its entire depth. In this case, you need to prepare a wooden insert that is suitable for this gap. It is coated with glue and inserted into a crack. Then it needs to be dried, cleaned, spent and painted. Small cracks in the window frame can simply be cleaned, spilled and smeared with oil putty. After drying, such a crack needs to be cleaned and painted with oil paint.
