For such things as, for example, bottles you can make several special cassettes advanced. Their design is quite simple and understandable from the pattern. Materials: multilayer plywood, bars and round crossbars. All compounds are collected on doughs with glue or in extreme cases — on screws. The bottles in such cassettes are stored as expected — in a horizontal position.
In some cases, part of the rack modules may be required to make it closed. To do this, it is enough to hang the door on the open side of the cube. They can be both paired swing and ordinary single, opening in one direction. For their hitching on the front edges of the cube panels, it is better to stick the edging rails with a thickness of 10-15 mm, since small screws of fastening the loops in the chipboard will be very bad.
And finally, for storing all trifles and household items that do not decorate the interior too much, part of the modules-cubes can be equipped with ordinary drawers. You can install them on roller guides (they are usually sold by paired sets), or use a small section as guides, which are glued from the inside to the side walls of the module.
When assembling a rack from individual modules-cubes, you should take care of the stability of the entire structure. The simplest solution is to install the lower row of cubes on a durable base, and between the above horizontal rows, lay continuous panels carved from multilayer plywood 10-12 mm thick. With a rack of three or more rows for the manufacture of a basement, it is advisable to use boards with a cross section of 40×80 or even 50×100 mm, if you need to install it on a not very smooth floor. The external dimensions of the base in the plan should be less than the size of the lower row per 25 mm.
