Everyone wants to have comfort and use it. This also applies to such a room as a combined bathroom. While in this room, we wish to contemplate its pleasant appearance. In the life of any person, the moment of insight is accurately occurs once. He understands that it is necessary to make a bathroom repair. Another insight comes with this understanding: there is no money.
I would like to immediately note that in our advanced age with its technologies it becomes enough just to figure out and make the repair of the bathroom and the toilet inexpensively. Search on sites, go shopping and the possibility of inexpensive repair of the bathroom and toilet becomes a reality.
So, let’s get down. From inexpensive facing materials, plastic panels are best suited for use in the bathroom. They can be lined with both the ceiling and walls. Put on the floor with classic, inexpensive tiles.
The panels will be mounted on the frame. It can be built from wood. And you can use metal profiles that are used to install drywall plates. Given the high humidity in the room, the metal is preferable to use metal. But the owner is a master.
If a decision is made to apply a tree, then it is important to properly treat with antifungal mixtures. They are sold in large quantities, from different manufacturers. It is better to use the tree dried, so that it does not conquer after installation. When it starts to war the frame, the entire wall is deformed with it. (Also read our article on the repair of the bathroom and turnkey toilet).
To not be chosen, it is important to carefully calculate the amount of the necessary material. In the presence of old tiles, it is removed along with glue. Before installing the frame, the entire wall and ceiling are treated with anti -inflam solution. Processing is carried out in good faith in two layers.
The frame is fixed using the level. It is important to fix the profile to the wall hard, it will hold the panels. If the frame is wooden, the panels are attached to it with nails. Fixed to the metal frame for metal self -tapping screws.
The joints between the ceiling and the walls are sealed with a ceiling plinth. It is glued to a special glue. Plastic is good because caring for it is not composed. Spent a damp cloth and it is clean.
But, the installation of panels is carried out after the tiles are arranged on the floor. Making the repair of the bathroom and toilet inexpensively, you can not do without tiles. On the floor it is ideal. No other cheap material will replace the tile.
The joints between the tiles and the walls can be closed with the baseboard. But, if you mount the panels directly on the floor, there may not be cracks. This is in the case of an even tile device on the floor.
You can put linoleum on the screed. Only this option is reliable before water falls under linoleum. After water falls under the material, it will begin to destroy it. It is very difficult to avoid this, even using daily cleaning. During cleaning, linoleum should be lifted and the floor is dried under it. From this, the destruction of the material is possible.
Bath and toilet repair are inexpensive — useful tips
Of course, making the repair of the bathroom and the toilet inexpensively, no one will change the whole plumbing. But it happens that a toilet or mixer is necessary to replace the toilet. And since all the plumbing remains indoors, it should be very thoroughly closed. To do this, use cardboard, polyethylene film, different blankets. The main thing is that the plumbing is not damaged.
When you have to change the toilet or mixer, it is better not to save. It is much easier to invest in quality once than then invest it in the repair of a neighboring apartment. And it is possible due to the flood through the acquisition of low-quality plumbing.
It is enough to purchase a toilet or middle -class mixer. In quality, they are little inferior from expensive, but delight.
