Plastic panels are the simplest, as well as cheap material that is used for decorating walls or ceiling decoration. They are made of high -quality plastic, which is resistant to mechanical damage and has a long service life. PVC panels are suitable for both working rooms and living rooms. In apartments with decorative panels, walls are usually finished in hallways or ceilings in toilets.
The main advantages of panels
An important advantage of using PVC panels as wall cladding is the possibility of their lining of non -even surfaces. Installation occurs on a prepared and aligned crate, which is a bars made of wood fastened with each other. Therefore, the total amount of wall decoration will depend on the cost of the material itself and the costs of wooden rails, nails or stamps. Kilesters are used instead of nails in order to obtain the opportunity to subsequently dismantle and transfer the crate with panels to a new place. The sheathing depending on the chosen design, as well as the qualities will cost about 80 — 250 rubles for each square meter. This method of decorative decoration is the most economical and easy due to the lack of the need to attract qualified labor to level the surface of the walls.
Another plus of wall cladding with PVC panels can be considered their special consumer properties. The durability and strength of the material from which they are made, as well as resistance to various scratches, make them very popular. If necessary, in case of moving, such a skin can be easily disassembled and taken to a new apartment. The ability not to absorb moisture allows you to use them in rooms with high humidity. Having sheathed the walls with panels, you will thereby increase the overall sound insulation and thermal insulation of the room. Also, the space between plastic panels and the wall can be filled with any heat -insulating material. They are very practical and do not require special care. So that they do not lose their appearance, it is periodically recommended to wipe them with a damp cloth using detergents that do not contain chlorine or abrasive elements.
Panels will make it possible to bring the most original ideas to life. They are produced in different color shades, with or without a pattern. Can be matte or glossy, imitate any natural material. With their help, you can create completely seamless surfaces or place at different angles.
Choosing decorative PVC panels
When choosing, the main attention must be paid to the quality of the raw materials, which was used in their manufacture. It is also not unimportant to manufacture and the equipment used. Pay attention to the width of the panel and the number of strength ribs located on the inside. The strength of the panel directly depends on their number. When buying, look at the back of the product, it must have an even color without extraneous inclusions. Check the density of the docking and geometry. All products should be perfectly even. Take a look at the drawing applied to it. It should be uniform and the outer side of the panel should not have a risk or wavy. Also the cost of the product and its manufacturer will tell you about its quality and reliability.
