Now one of the most common materials for external decoration of buildings are aluminum composite panels. The huge popularity of this product is due to the fact that other materials lose their appearance under the influence of external factors much faster than such panels.
The brick is destroyed under the influence of moisture, the tree is an excellent environment for the occurrence of various fungi and parasites, moreover, this material is burned and subject to decay, plastic panels are of low strength. And the facades of the buildings, during which the aluminum composite panels of Winbond were used, will look like new for a long time.
Each aluminum composite panel is two sheets made of aluminum alloy, between which a sheet of polymer material is glued. The thickness of the panel can be from 3 to 6 mm. In width, as a rule, they make up 1. 22 m, in length — 4. 05 m. Outside, the panel is additionally covered with either polyvinylendenfluoride or polyester.
The advantage of this method of manufacturing facing panels is, first of all, in a combination of aluminum and polymer material. Aluminum is responsible for the high strength of the panel, resistance to external influences. Polyethylene is responsible for the ease and ease of installation of this design.
Aluminum sheets are stained in advance and can be white, red, green, black, blue, yellow, gold and silver flowers. Therefore, aluminum compositional panels have another advantage, which consists in the possibility of using them in the embodiment of even the most daring design ideas.
The panels are installed as follows: along the entire perimeter of the sheet, the so -called mounting bends bend at a right angle. Next, they are inserted into the mounting profile, which is pre -attached to the wall, and are snap. For the stiffness of the facade, shields or bars can be used as undergrounds for plates. It follows that the achievement of a smooth surface when facing the building with aluminum compositional panels is impossible — joints in this case cannot be avoided.
The advantages of aluminum compositional panels as mentioned above, the main feature of these panels is a combination of aluminum and polyester. This composition entails a number of advantages:
The panels have high strength, durable, resistant to external influences.
They are quite tough, but at the same time, elastic, which makes them one of the most convenient materials in the construction.
Easily mounted and dismantled, while reliably attached.
Have a very low thermal conductivity.
Have excellent soundproofing qualities.
Fire safety.
They weigh little, which greatly facilitates their transportation and installation.
Can be used in creating non -standard structures.
Buying aluminum composite panels will not be difficult now.
Aluminum compositional panels are used in the cladding of many types of buildings, but they gained particular popularity in the construction of exhibition pavilions and the installation of advertising structures.
In addition, they are widely used for internal cladding of hospitals, cafes, airports, shopping centers, railway stations, shops, etc. D. Also, such panels are widely used in shipbuilding and automotive industry.
Thus, we can conclude that the aluminum composite panels of WinBond are the building material of the future that can be used in the implementation of even the most daring projects. Buy aluminum composite panels and using them during construction means to provide your «brainchild» with a great appearance, durability and strength.
